Description
The PNC-10 Elite CNC cutting machine is a compact economical solution for oxy-fuel and plasma cutting. A low profile and small foot print allows the PNC-10 to be transported easily and stored efficiently.
The PNC-10 Elite is a small machine with big features including piercing mode, array settings and kerf compensation.
The easy to use D410 control includes a 45 shape library and a simple to use interface. The standard USB port allows downloading of code for custom shapes and designs
Features
- CNC Controller - Computer controlled technology allows unlimited shape cutting using 45 preprogrammed patterns or use of NC code.
- Performs Various Cuts -including straight lines, circles, programmed shapes, and straight beveling.
- Light weight -Highly portable. Can be easily moved and used just about anywhere
- Electric Clutch X and Y -Position machine body and torch quickly before and after a cut.
- Oxy-Fuel Cutting - Programmable piercing sequence prevents tip damage.
- Plasma Cutting Ready -Cut non-ferrous material and thinner material by adding on a plasma system
Technical specifications
| PNC-10 Elite | ||||
|---|---|---|---|---|
| Machine body | Type | 1000 | 1250 | 1500 |
| Transverse bar length | 1,500mm | 1,750mm | 2,000mm | |
| Effective cutting width | 1,000mm | 1,250mm | 1,500mm | |
| Longitudinal rail length | 2,000mm, 3,000mm, 3,500mm selectable | |||
| Effective cutting length | 1,500mm, 2,500mm, 3,000mm selectable | |||
| Rapid speed | 3,000mm/min | |||
| Cutting speed | 100-2,000mm | |||
| Model | Single phase, 110V or 220V/230V selectable by internal switch | |||
| Heat shield plate | Provided at side of the machine and the torch motor | |||
| Gas cutting | Gas cutting torch | 1 set with motorized torch riser | ||
| Cutting tip | 3 seats KOIKE 100 series tip | |||
| Cutting thickness | Max. cutting thickness is subject to cutting tip size. | |||
| Plasma cutting | Torch holder | 1 set with motorized torch riser / Diameter 35mm | ||
| Available plasma system | Non high frequency arc start type plasma system | |||
| Plasma cable hold | 1 set of Bridge type plasma cable hold arm | |||
| CNC | Model of CNC | KOIKE D420 | ||
| Operation panel | 7 inch LCD graphic display and key pad | |||
| Language | English or Chinese switchable | |||
| Program input | 1 set of USB port | |||
| Contouring | X / Y 2 axes control | |||
| Coordinate range | Max. +/- 99,999.999mm | |||
| Program format | EIA format | |||
| Shape library | 48 patterns | |||
| Operation function | Dry run, Reverse, Plate alignment, Mirror, etc. | |||
| CAD/CAM | Model | PNC-CAM 2A[KAP Portable CNC editions with Auto Nesting] | ||
| * Fume collector is not included. | ||||
