Description
Cir-Cut II is a portable automatic oxy-fuel circle cutting machine especially designed for circle cutting with or without bevel, on even surfaces, in horizontal and vertical positions.
A powerful electromagnet simplifies cutting in any position. The rotating gas manifold prevents from tangling hoses and a reset of the machine to its home position.
A powerful electromagnet simplifies cutting in any position. The rotating gas manifold prevents from tangling hoses and a reset of the machine to its home position.
Features
- Low weight (simple operation and transport)
- Easy positioning for cutting by the use of centering pin (circle diameter 40- 200 mm)
- Bevel cuts till 45° possible
- No tangeling hoses due to rotating gas manifold
Scope of delivery
- Cutting machine CIR CUT-I or II
- Cutting nozzles (5-30 mm material thickness)
- Connecting lead (5 m)
- Tool set
- Operation instructions
Download
 | EN – Cir-Cut - Product brochure ( 1565KB) |
| EN – Cir-Cut - Operation manual ( 2571KB) |
Technical specifications
CIR CUT- I/II
Model | CIR CUT-I | CIR CUT-II | CIR CUT-II -400V |
Cutting thickness | 5-30 mm | ||
Bevel Angle | 0~45° | ||
Cutting diameter | φ40-200 mm | φ60-400 mm | |
Cutting speed | 0.5-7.5 rpm | 0.27-4.0 rpm | |
Motor | 15W DC Motor | ||
Power Supply | Various voltage type is available | ||
Weight | 11.0 kg | 11.3kg | 12kg |
Fixing | ON/OFF type magnet | Electronic Magnet | |
Cutting Tip | 106# 0, 1, 2 | ||